Welcome to our websites!

R-R 630 Double Side Sanding Machine Manufacturer

Short Description:

Double side sanding machine R-R 630 adopts wide-band double-second frame to thicken the plates of amine plywood, fiber female board, veneer board, flower board, MDF, etc., such as seconds and polished, to achieve the desired surface.

 

 


  • Total motor power: 22kw
  • Sanding plate length: >200mm
  • First sand motor power: 11kw
  • Second sand motor power: 7.5kw
  • Sanding Plate Thickness: 2.5-110mm
  • Belt speed (first group): 20m/s
  • Belt speed (second group): 16m/s
  • Sanding plate maximum width: R-RP630mm
  • Workbench Lifting Motor Power: 0.37kw
  • Product Detail

    video

    Product Tags

     Specifications of sanding machine

    Dimension
    (width * length * height)

    Belt size
    (width * length)

    Conveyor motor power

    Equipment weight

    Feed rate

    1200*2000*1930

    640*1900

    1.5kw

    2000kg

    5.5-28m/min

    7-1

    DENSITY BOARD

    7-2

    PARTILE BOARD

    7-3

    COMPOSITE BOARD

    7-4

    WOODEN PLANKS

    7-5

    SCAB

    7-6

    ECOLOGIAL BOARD

    More than one detail,brilliant

    8-1

    lmported bearing
    The bearing imported from Japan for sanding machine can accelerate
    the working efficiency and prolong the service life of the machine.

    9-1

    TWO rollers and one pad structure
    Use regular thickness sanding and fin esanding with various boards.

    10-1

    Water—oiI separator
    Effectively filter the moisture in the air and extend the service
    life Of pneumaticc omponents.

    11-1

    Rubber material conveyor beltr
    Long time use will notappear off—tracking situation,aggravate the
    fuselage to prevent shaking waves,to prevent deformation.

    12-1

    Cast iron gearbox transmission motor
    Even in the case of high temperature,it does not affect the
    work.Conveying speed can be adjusted atwill.

    For more details

    14 15 16 17

    The whole film

    18-1
    19
    20

    X. Lubrication and maintenance of Sanding Machine tools
    ---- after each shift
    (1) Clean the entire machine, and the surface of the feeding workbench and the surface of the sanding roller should be free of dust.
    (2) Check the compressed air filter to remove the condensation.

    ----After work every week
    (1) Lubricate the lubrication points of the machine according to the lubrication requirements in the table.
    (2) Check the air venting device to remove the condensate.
    (3) Check the sanded graphite cloth and replace it if necessary.

    ----After monthly work
    (1) Lubricate the lubrication points of the machine according to the lubrication requirements in the table.
    (2) Check the tension of the machine feed drive and the lift drive bar, and tension if necessary.


  • Previous:
  • Next:

  • Write your message here and send it to us